DownHole SAT Printouts

Mixed Water Printouts

Surface Water (Single Brine) Printouts

NOTE: Tables print at the resolution of your printer. Resolution has been sacrificed in this web page to accomodate lower resolution monitors. These printouts were generated at 75 dpi rather than the 300 dpi to 600 dpi common for Laser and Ink Jet printers to allow them to fit on the screen of a standard VGA monitor.

The DownHole Rx series add a dosage line to the Water Chemistry Tables when a product or corrosion model is selected.

MIXING MODE PRINTOUTS

Injection Water Chemistry Printout (The First of 2 Waters To Be Mixed)

[Top]

Injection Water Deposition Potential Indicators

[Top]

Injection Water Momentary Excess - The Quantities Which Must Precipitate (or Dissolve) To reach Equilibrium.

[Top]

Formation Water Chemistry - The Second Of 2 Waters To Be Mixed

[Top]

Formation Water Deposition Potential Indicators

[Top]

Formation Water Momentary Excess - The Quantity Which Must Precipitate (or Dissolve) To Bring The Water To Equilibrium.

[Top]

Mixed Water Chemistry Versus %Injection Water - The Predicted Mixtures. Rx Series Adds A Minimum Effective Inhibitor Residual

[Top]

Deposition Potential Indicators Vers % Injection Water

[Top]

Mixed Water Momentary Excess (mg/L)

[Top]

Mixed Water Momentary Excess (Lbs/1000 Barrels)

[Top]

SURFACE WATER (Single Brine) PRINTOUTS

Surface Water Chemistry Input (Single Brine Evaluation)

[Top]

Surface Water Deposition Potential Indicators (Single Brine)

[Top]

Surface Water Momentary Excess (The Instantaneous Quantity Which Must Precipitate (or Dissolve) To Bring The Water To Equilibrium.

[Top]