Edition Guide

Editions for Troubleshooting, Sales, and R&D

WaterCycle®, hyd-RO-dose®, DownHole SAT™, WatSIM™ and MineSAT™ are offered in four editions covering each unique position within a water treatment organization. The most basic version will perform a full mineral scale evaluation, the most robust version enables users to build custom models for inhibitors or corrosion.

Cycle below or view the Editions Chart to decide the edition which is best for you.

Basic Edition

Uses
The Basic Edition will perform a thorough scale evaluation (18 + Saturation Levels & Indices), for a selected range of parameters. The program outputs results using a selection of thorough tables and color coded graphs.

It is useful for troubleshooting a system and finding a systems optimum operating range with or without pH controls.

What it Wont Do
The Basic Edition does not model inhibitors.

Basic Edition Available In:
WaterCycle
hyd-RO-dose
DownHole SAT
WatSIM
MineSAT

Salesman & Field Engineer

Uses
The salesman edition calculates all scale potentials and generates all 2D and 3D profile graphs, plus adds the ability to model Product Files (created with a Formulator or Laboratory Edition). As the names suggest, this is a useful tool for staff members in sales or field work.

Using Product Files, salesman can select a product, obtain optimum dosage recommendations and check the limits and failure points in a system. (Each product is added to the system once created with a Formulator/Product Manager or Laboratory Edition as a product file in the /.../water/inhib folder).

What it Wont Do
The Salesman edition does not allow a user to input, alter or view what is in product files (formulas).

NOTE: Product Files are made with the Product Manager/Formulator Edition or Laboratory Edition. This editions does not come with inhibitor models, it was designed to compliment the Product Manager/Formulator and Laboratory Editions.

Salesman Edition Available In:
WaterCycle

Field Engineer Edition Available In:
hyd-RO-dose
DownHole SAT
WatSIM
MineSAT

Product Manager & Formulator Edition

Uses
The Product Manager & Formulator Editions add the ability to generate Product Files. Product files take only a moment to create using French Creek’s vast Inhibitor Model Library, containing most widely used generic and proprietary materials.

To input a product, a user selects the necessary materials end enters the material's active. Once a Product File is created it can model dosages and limits on Product Manager/Formulator Editions or be distributed to Salesman/Field Engineer users for dosage modeling. This process is outlined at www.frenchcreeksoftware.com/inhibitor-formulation

What it Wont Do
This edition cannot create custom correlation files for use as corrosion or inhibitor models.

Product Manager Edition Available In:
WaterCycle

Formulator Edition Available In:
hyd-RO-dose
DownHole SAT
WatSIM
MineSAT

Laboratory Edition

Uses
The Lab edition adds the ability to develop your own models from laboratory data, field data or a combination. Models can be developed for scale inhibitor dosage optimization, corrosion inhibitors, corrosion rate prediction, and suspended solids dispersant dosage optimization.

Laboratory Edition Available In:
WaterCycle
hyd-RO-dose
DownHole SAT
WatSIM
MineSAT

Also Check Out the Editions Chart »